Replacement LED Board

$4.00

This is just a simple replacement RGB LED or Strobe LED Board. It has four pins on the back, one for +12V, and three for the R, G, B negative inputs. This board can be easily plugged into the light bar LEDs to replace them.

This board has the resistors for 12v operation. To run at 24v, you can add a 150 ohm 1 watt resistor to the blue and green LEDs, and a 330 ohm 1/4w resistor to the red LED.

Type:
Quantity:
Add To Cart

This is just a simple replacement RGB LED or Strobe LED Board. It has four pins on the back, one for +12V, and three for the R, G, B negative inputs. This board can be easily plugged into the light bar LEDs to replace them.

This board has the resistors for 12v operation. To run at 24v, you can add a 150 ohm 1 watt resistor to the blue and green LEDs, and a 330 ohm 1/4w resistor to the red LED.

This is just a simple replacement RGB LED or Strobe LED Board. It has four pins on the back, one for +12V, and three for the R, G, B negative inputs. This board can be easily plugged into the light bar LEDs to replace them.

This board has the resistors for 12v operation. To run at 24v, you can add a 150 ohm 1 watt resistor to the blue and green LEDs, and a 330 ohm 1/4w resistor to the red LED.

16 channel Replacement board
$13.00
RGB Button Extension Cable
$3.00
12V solenoid Version 3
$16.00
RGB Leaf Button
$6.00
Replacement Mosfet Board
$3.00