Virtual Pinball Builders Kit

from $399.00

*** Note that due to limited availability of KL25Z boards and the PinOne just being a much better experience for my users, I have stopped producing builders kits using the KL25Z boards at this time. If you have any questions or have a specific need for the KL25Z builders kit, please reach out to me via the contact page ***

Pictures show the older V3 solenoids, but all kits come with the new V4 solenoids.

Now you can have a full virtual pinball experience, just like you would get if you paid thousands of dollars, but for a fraction of the cost and almost as easy to setup.

This is a kit that includes all of my gear in a nice all in one package, fully assembled and ready to plug and play. All wires, screws, ribbon cables and everything you need to hook it up is included.

All kits come with my main board that will give you analog nudge, inputs for buttons and plunger, and outputs to run all your toys.

If you get both SSF and the solenoid option together, you get a big discount on the SSF components, so if you are planning on doing SSF in the future it’s worth considering it with the kit. Everything sold in the separate SSF kits comes with the builders kits. You get the sound card, wires, power supply, amps, and speakers.

I recommend the PinOne over the KL25Z board at this time due to much improved board architecture and availability of parts

The kits come in four sizes:

  • VR Cabinet Kit - This kit comes with 4 solenoids and/or the 2.1 (3 speaker) SSF system and my PinOne Board, plunger and the button board with an expansion board and 12 buttons (5 RGB and 7 Single Color LED)

  • Small Cabinet Kit - comes with everything in the VR Cabinet Kit but adds an additional 4 solenoids for a total of 8 solenoids and also comes with the service board.

  • Medium to Large Cabinet Kit - everything in the starter kit, plus a shaker motor, and 10 solenoids instead of 8 and/or the 4.1 (5 speaker) SSF System

  • Extreme Builders Kit - everything in the above kit, plus an additional expansion board, and the LED light bar

PinOne configuration instructions can be found here

Connecting the Builders kit instructions are all found here

pinballcabinet.com has designed a VR cabinet that works perfectly with the VR Cabinet Kit, so definitely worth checking it out if you are looking to build your own cabinet: https://pinballcabinet.com/products/pinsim-virtual-reality-pinball-cabinet-flat-pack

Plunger Color:
Control Board:
SSF:
Kit:

*** Note that due to limited availability of KL25Z boards and the PinOne just being a much better experience for my users, I have stopped producing builders kits using the KL25Z boards at this time. If you have any questions or have a specific need for the KL25Z builders kit, please reach out to me via the contact page ***

Pictures show the older V3 solenoids, but all kits come with the new V4 solenoids.

Now you can have a full virtual pinball experience, just like you would get if you paid thousands of dollars, but for a fraction of the cost and almost as easy to setup.

This is a kit that includes all of my gear in a nice all in one package, fully assembled and ready to plug and play. All wires, screws, ribbon cables and everything you need to hook it up is included.

All kits come with my main board that will give you analog nudge, inputs for buttons and plunger, and outputs to run all your toys.

If you get both SSF and the solenoid option together, you get a big discount on the SSF components, so if you are planning on doing SSF in the future it’s worth considering it with the kit. Everything sold in the separate SSF kits comes with the builders kits. You get the sound card, wires, power supply, amps, and speakers.

I recommend the PinOne over the KL25Z board at this time due to much improved board architecture and availability of parts

The kits come in four sizes:

  • VR Cabinet Kit - This kit comes with 4 solenoids and/or the 2.1 (3 speaker) SSF system and my PinOne Board, plunger and the button board with an expansion board and 12 buttons (5 RGB and 7 Single Color LED)

  • Small Cabinet Kit - comes with everything in the VR Cabinet Kit but adds an additional 4 solenoids for a total of 8 solenoids and also comes with the service board.

  • Medium to Large Cabinet Kit - everything in the starter kit, plus a shaker motor, and 10 solenoids instead of 8 and/or the 4.1 (5 speaker) SSF System

  • Extreme Builders Kit - everything in the above kit, plus an additional expansion board, and the LED light bar

PinOne configuration instructions can be found here

Connecting the Builders kit instructions are all found here

pinballcabinet.com has designed a VR cabinet that works perfectly with the VR Cabinet Kit, so definitely worth checking it out if you are looking to build your own cabinet: https://pinballcabinet.com/products/pinsim-virtual-reality-pinball-cabinet-flat-pack

12v to 24v knocker circuit conversion kit 12v to 24v knocker circuit conversion kit 12v to 24v knocker circuit conversion kit 12v to 24v knocker circuit conversion kit
12v to 24v knocker circuit conversion kit
from $25.00
Options:

Parts list for the kits

Small Kit

  • 1x plunger board and plunger

  • 1x 12 output board with PinOne (main board)

  • 1x button board

  • 2x small flipper button boards
  • 2x 12 pin ribbon cables (for attaching flipper button boards to main button board)
  • 5x RGB Buttons
  • 7x single color buttons
  • 1x 12v power supply
  • 2x 4 solenoid bar with life extenders
  • 1x 20 pin ribbon cable (for button board to main board)
  • 1x 16 pin ribbon cable (for button board to main board)
  • 2x 5 pin connectors (for connecting 2 solenoid bars to main board)
  • 1x plunger cable (for connecting plunger to main board)
  • 8x PCB mount screws and spacers (for button board )
  • 1x micro to standard USB cable

Medium Kit

  • 1x plunger board and plunger

  • 1x 12 output board with PinOne (main board)

  • 1x button board

  • 2x small flipper button boards
  • 2x 12 pin ribbon cables (for attaching flipper button boards to main button board)
  • 5x RGB Buttons
  • 7x single color buttons
  • 1x 12v power supply
  • 2x 3 solenoid bar with life extenders
  • 2x 2 solenoid bar with life extenders
  • 2x 20 pin ribbon cable (for button board to main board and service board)
  • 1x 16 pin ribbon cable (for button board to main board)
  • 1x shaker motor
  • 2x 4 pin connectors (for connecting 3 solenoid bars to main board)
  • 2x 3 pin connectors (for connecting 2 solenoid bars to main board)
  • 1x plunger cable (for connecting plunger to main board)
  • 4x shaker motor screws
  • 8x PCB mount screws and spacers (for button board)
  • 1x micro to standard USB cable
  • 1x service board

Extreme Kit

  • 1x plunger board and plunger
  • 1x 12 output board with PinOne (main board)

  • 1x 16 channel expansion board

  • 1x light bar

  • 1x button board
  • 2x small flipper button boards
  • 2x 12 pin ribbon cables (for attaching flipper button boards to main button board)
  • 5x RGB Buttons
  • 7x single color buttons
  • 1x 12v power supply
  • 2x 3 solenoid bar with life extenders
  • 2x 2 solenoid bar with life extenders
  • 3x 20 pin ribbon cable (for expansion board, service board and button board)
  • 1x 2m 20 pin ribbon cable (for light bar)
  • 1x 16 pin ribbon cable (for button board to main board)
  • 1x shaker motor
  • 2x 4 pin connectors (for connecting 3 solenoid bars to main board)
  • 2x 3 pin connectors (for connecting 2 solenoid bars to main board)
  • 1x plunger cable (for connecting plunger to main board)
  • 4x shaker motor screws
  • 4x light bar mounting screws and spacers
  • 12x PCB mount screws and spacers (for button board and expansion boards)
  • 1x micro to standard USB cable

Compatible products