PinOne Main Virtual Pinball Connection Board
With this board, you will be able to use your PinOne board to use inside of medium to large pinball machines. If you are looking for a small board to fit in a small cabinet, or don’t need as many outputs, then check out the PinOne Mini board. This board provides easy access to connect the following:
14 button inputs
Powered outputs for 5 RGB lights and 4 single color LEDs (5V 25mA current outputs, current limited, so no risk of shorting any output out) Button board required to expose outputs.
Plunger input for a potentiometer based plunger assembly
12-24V High power input connection to run the onboard 12 outputs
11 high power mosfets for running a variety of pinball toys (solenoids, shaker, beacon etc.)
Expansion board slot for running CSD expansion boards for adding a light bar or additional outputs
Ability to add the CSD service board
Dedicated button board outputs to drive buttons and lighted outputs
Full analog nudge
Dimensions: 154mm x 143mm
With the PinOne Main board, you can get all the benefits of flipper feedback, lighted buttons, a plunger and button inputs without having to configure DOF at all! But take the time to configure DOF and get even more out of your rig since it’s all 100% DOF compatible!
Note that the only reason why you would purchase it without the control board, would be if you had already purchased the control board by itself. The control board is required for the PinOne Main board to work.
With this board, you will be able to use your PinOne board to use inside of medium to large pinball machines. If you are looking for a small board to fit in a small cabinet, or don’t need as many outputs, then check out the PinOne Mini board. This board provides easy access to connect the following:
14 button inputs
Powered outputs for 5 RGB lights and 4 single color LEDs (5V 25mA current outputs, current limited, so no risk of shorting any output out) Button board required to expose outputs.
Plunger input for a potentiometer based plunger assembly
12-24V High power input connection to run the onboard 12 outputs
11 high power mosfets for running a variety of pinball toys (solenoids, shaker, beacon etc.)
Expansion board slot for running CSD expansion boards for adding a light bar or additional outputs
Ability to add the CSD service board
Dedicated button board outputs to drive buttons and lighted outputs
Full analog nudge
Dimensions: 154mm x 143mm
With the PinOne Main board, you can get all the benefits of flipper feedback, lighted buttons, a plunger and button inputs without having to configure DOF at all! But take the time to configure DOF and get even more out of your rig since it’s all 100% DOF compatible!
Note that the only reason why you would purchase it without the control board, would be if you had already purchased the control board by itself. The control board is required for the PinOne Main board to work.
With this board, you will be able to use your PinOne board to use inside of medium to large pinball machines. If you are looking for a small board to fit in a small cabinet, or don’t need as many outputs, then check out the PinOne Mini board. This board provides easy access to connect the following:
14 button inputs
Powered outputs for 5 RGB lights and 4 single color LEDs (5V 25mA current outputs, current limited, so no risk of shorting any output out) Button board required to expose outputs.
Plunger input for a potentiometer based plunger assembly
12-24V High power input connection to run the onboard 12 outputs
11 high power mosfets for running a variety of pinball toys (solenoids, shaker, beacon etc.)
Expansion board slot for running CSD expansion boards for adding a light bar or additional outputs
Ability to add the CSD service board
Dedicated button board outputs to drive buttons and lighted outputs
Full analog nudge
Dimensions: 154mm x 143mm
With the PinOne Main board, you can get all the benefits of flipper feedback, lighted buttons, a plunger and button inputs without having to configure DOF at all! But take the time to configure DOF and get even more out of your rig since it’s all 100% DOF compatible!
Note that the only reason why you would purchase it without the control board, would be if you had already purchased the control board by itself. The control board is required for the PinOne Main board to work.
